Experience Inc. Jobs

This job was posted by https://www.azjobconnection.gov : For more information, please see: https://www.azjobconnection.gov/jobs/6659793

Irrigation: Field worker to perform the following duties:

Irrigation Flood: Workers walk on uneven furrows. Using a shovel, workers shape and/or remove soil gates within the furrow to give access or obstruct water flow in field. Workers have to manually connect plastic pipes that connect the water source line into the field. These pipes weigh approximately 5lb, are 5ft in length, and 2 in width.

Pre-Irrigation: Workers walk on wet uneven furrows and across beds. Field workers move within the field looking for any non-working or clogged sprinklers. Under the direction of the field supervisor, workers make sure sprinklers arent clogged or have any pipe disconnected. Pre-irrigation is used to water down soil and prepare the field prior to farming.

Irrigation: Workers walk on uneven furrows. Field workers pick and/or lay sprinklers and irrigation pipes. Employees are grouped in groups of 3 workers. One worker drives the tractor, and the other two workers walk behind a tractor and a trailer that carries aluminum pipes. Under the direction of the field supervisor, the worker grabs the pipes and sprinklers and by bending at the waist they have to manually unload and/or load pipes into the furrow to set the field up for irrigation following transplanting.

Break/move pipes: Workers walk on uneven furrows. Field workers pick and/or lay sprinklers and irrigation pipes. After a transplanted field is watered down, workers have to move and/or break irrigation pipe lines. Under the direction of the field supervisor, field workers have to move and carry the aluminum pipes and sprinklers from one furrow into the next as needed to water down the field evenly. Aluminum pipes and sprinklers weigh approximately 50 lbs, 30ft in length, 2 in width.

Farm and Harvest Equipment Repair Inspection of parts of tractors and other farm and harvest equipment. Removal of parts. Lubrication, reconditioning, coating ,or replacement of parts on tractor and other farm and harvest equipment. Use of basic hand tools. Clean and polish of equipment. Adjustment or replacement of components. Work performed solely on agriculture property parcels.

Farm and Harvest Equipment Cleaner Washing of farm and harvest equipment with water. Removal of dirt and debris from farm and harvest equipment. Application of soap and chlorine to farm and harvest equipment for proper disinfection and removal of potentially harmful microbes. Filling of fuel of for harvest and farm equipment. Work performed solely on agriculture property parcels.

FORKLIFT DRIVER SPECIFICATIONS:

Sits down on the forklift and performs the following:

1. Moves knobs on the machine to move loads (bins or pallets) from one trailer to another in fields

2. Loads and unloads from trailer empty containers and containers full of product in fields

3. Required basic knowledge of driving a forklift, must pass a forklift safety training (provided by the employer) and demonstrate ability to operate forklift in a safe manner.

CHALEQUERO (SAFETY VEST MAN):

75% of the time performs the duties of the jobs mentioned above. Replaces workers on bathroom breaks and supervises safety during machine and tractor turns getting off the field or coming back to start new row/furrow

CIF/CFR: TRACTOR DRIVER SPECIFICATIONS:

1. Transfers water from Reefer to tractor and from tractor to Machine. Mixes chlorine with water.

2. Builds bins on top of a platform, transports trailer from the lot the yard and tarp loads.

3. Drives tractor as bins are filled up.

MACHINE DRIVERS:

1. Rinses Machine before, during, and after shift.

2. Inspects the Machine before, during, and after shift.

3. Drives the Machine.

4. Opens and Closes the Machine 5. Takes extension in and out and loads the ma hine on transporting dolly.

REYNA (BIN FILLER):

Builds bins on top of a platform, places liner in quality assurance. Makes sure bins are filled correctly. Closes the liner and tarps loads.

WRAP/HEARTS/MIXED: TRACTOR DRIVER SPECIFICATIONS:

1. Places pallets on platform and loads boxes.

2. Transports trailer from the lot the yard and tarp loads.

3. Places V-boards and ties loads.

MACHINE DRIVERS:

1. Rinses Machine before, during, and after shift.

2. Inspects the Machine before, during, and after shift.